The SpinClean centrifugal oil separator is designed to separate contaminants from the lubricant by high-speed rotation, using centrifugal force instead of a conventional filter media. This process allows it to retain fine particles, carbon soot, and metallic residues without obstructing the oil flow.
The SpinClean centrifugal separator combines precision, durability, and performance, ensuring effective and continuous filtration without the need for frequent filter element replacements.
Applications
- Compressors
- Diesel and Gas Engines
- Marine engines and generators
- Hydraulic Oil Systems
- Turbine Lube Oil Skids
- Gearbox Oil Cleaning
Performance Benefits
- Extends oil and filter life by 50%
- Reduces hazardous waste
- Reduces engine wear
- User friendly
- Easy installation
- Diagnostic Tool
- True centrifuge
- Removes solids below one micron
- Rugged construction
Model 75
- Throughput:1 Gallon per minute (3.7 L/min)
- Oil Sump Capacity:Up to 15 Gallons (56.8 L)
- Dirt Holding Capacity:18 in3 (278 cm3)
The SPINCLEAN Model 75 is a compact, high-efficiency oil purification centrifuge engineered for hydraulic, lubrication, and light industrial fluid systems where contaminant removal, moisture control, and extended fluid life are critical to reliable equipment performance.
Model 150
- Throughput:2 Gallons per minute (7.6 L/min)
- Oil Sump Capacity:30 Gallons (113.5 L)
- Dirt Holding Capacity:53 in3 (828 cm3)
The SPINCLEAN Model 150 is a mid-capacity centrifugal oil cleaning system designed for industrial lubrication and hydraulic applications where consistent contaminant separation, reduced maintenance intervals, and enhanced system protection are essential to operational continuity.
Model 300
- Throughput:4 Gallons per minute (15 L/min)
- Oil Sump Capacity:Up to 60 Gallons (227 L)
- Dirt Holding Capacity:150 in3 (2340 cm3)
The SPINCLEAN Model 300 is a high-performance fluid purification centrifuge built for demanding industrial environments, effectively removing water, sludge, and fine particulates from oils in heavy equipment, power generation, and process systems where uptime and fluid integrity are mission-critical.
Model M300
- Throughput:4 Gallons per minute (15 L/min)
- Oil Sump Capacity:Up to 60 Gallons (227 L)
- Dirt Holding Capacity:150 in3/2340 cm3
The SPINCLEAN Model M300 is a mobile centrifugal oil cleaning solution engineered for on-site maintenance programs, delivering efficient contaminant removal and fluid restoration in field service, fleet, and remote industrial operations where flexibility and performance are equally important.
- Also Featuring: Side Drain
Model 1000
- Throughput:8, 12, & 16 Gallons per minute (30, 45, 60 L/min)
- Oil Sump Capacity:120, 180, or 240 Gallons (454, 681, 908 L)
- Dirt Holding Capacity:350 in3 (5462 cm3)
- Also Featuring: :Bottom drain, Optional oil control base
The SPINCLEAN Model 1000 is a large-capacity industrial oil purification centrifuge designed for continuous-duty operations in high-volume lubrication and hydraulic systems where maximum contaminant extraction, extended oil life, and reduced disposal costs drive long-term operational efficiency.
