Ultimate-Luber™ Series

Developed to be more powerful than the original ELECTRO-LUBER™, the ULTIMATE-LUBER™ is a motor-driven automatic lubricator that can be refilled with standard grease guns.

This strength of ULTIMATE-LUBER™ allows you to perform multi-point lubrication and route the lubricant through long feed lines to the progressive distributors. When a dispensing cycle is selected, the units will activate at scheduled intervals.

ULTIMATE-LUBER™ is available in 4 sizes: 2, 4, 8 or 17 oz.(60, 125, 250 or 500 cc)
Model 60: 7-1/4″ tall X 3-1/2″ diameter.
Model 125: 7-1/2″ tall X 3-1/8″ diameter.
Model 250: 7-1/2″ tall X 4″ diameter.
Model 500: 8-3/4″ tall X 4-3/4″ diameter.

SKU: ULTIMATE-LUBER™ SERIES Category:

Our ULTIMATE units make machinery maintenance easier, cheaper and safer!
The most powerful automatic lubrication system on the market! Produces over 1000 psi allowing it to service single point applications up to 30' (9m) away and multi-point applications up to 20' (6m) away

The JACK LUBER™ uses a replaceable, single-use cartridge that changes in seconds. The JACK LUBER™ drive unit is pure ULTIMATE power and runs off of the ATS battery pack or optional AC/DC adapter.

  • Operating temperature -20ºC to +55ºC (NOTE: Low temperature lubricants must be used at low temperatures)
  • One unit services up to 12 lubrication points (with optional progressive manifold block)
  • Single or multi-point lubrication
  • On-site refillable and lasts for many uses
  • Multiple configurations to empty from 15 days to 2 years
  • Refillable with a standard grease gun (no other tools needed)
  • Suitable for indoor and outdoor use.
  • The Ultimate has an internal mixer to minimize grease separation and improve lubricant consistency
  • CERTIFICATION: UL/CUL Div. 2 Hazardous Area Approved